• Operating temperature –55˚C to +150˚C
• Sealing (mated and unmated) IP69K, 1hr at 2 metres immersion and proof against high pressure steam jet cleaning
• Salt spray resistance is plating dependent, eg 500hrs for Black Zinc Nickel
• Shock and vibration in accordance with DEF-STAN 00-35 Iss 4 Ch2 01 test M1 Appendix A Figs A22 – High Level and A23 Low Level
• Impact in accordance with EIA-364-42 Light Service Class
• Fluid resistance as per MIL-DTL-38999L
• IP2X finger protection in accordance with BS EN 60529 mechanical finger
• RoHS compliant (unless Olive Drab Cadmium plate is specified)
• Current rating up to 1000A
• Shell to shell continuity < 2.50mΩ initially, in accordance with EIA-364-83
• Shell to backshell continuity < 5.00mΩ initially, in accordance with EIA-364-83
• Insulation resistance 5000MΩ
• Working voltage:

Size 13 to 15: 500Vac RMS at sea level, 600Vdc at sea level,

Size 17 to 25: 875Vac RMS at sea level, 1238Vdc at sea level

• Dielectric withstand voltage (EIA-364-2):

Size 13 to 15: At 1500Vac RMS, 2mA max leakage current

Size 17 to 25: At 2625Vac RMS, 2mA max leakage current

• EMI 360˚ screening facilitated with straight or 90˚ EMC backshell
• Mating durability 500 cycles minimum, contacts rated to 20,000 cycles
• Non-magnetic
• Crimp, lug or bus-bar termination
• Anti-vibration Tri-start thread coupling
• Mating force as per MIL-DTL-38999L Table IV
• Straight, right angle or locking ring only backshell options
• Panel cut outs as per MIL-DTL-38999L for rear mounting receptacles only